To use a Lefu 1700-D2 Laminator correctly, you can follow these general steps:
Read the instructions: Familiarize yourself with the Lefu 1700-D2 Laminator’s user manual or instructions provided by the manufacturer. This will help you understand its specific features, settings, and any safety precautions.
LF1700-D2 Auto Laminator (28 m/min)
Model: LF1700-D2 Automatic Roll Laminator
Rear Trimmer: 3 Pcs
Max Lamination Width: 1630mm/64″
Lamination Temp: 0~60°C/0~140°F (0~120°C/0~248°F Optional)
Max Lamination Speed: 28 M/Minute
Roller Up and Down: Pneumatic Pressure
Prepare the Lefu 1700-D2 Laminator
Keep the machine clean and clear of debris. Verify if adjustments or settings are needed based on the thickness or type of laminating pouch/film you intend to use.
Preheat the Lefu 1700-D2 Laminator
If preheating is required, switch on the machine and let it reach the recommended operating temperature. This may take several minutes, depending on the model.
Load the Laminating Pouch/Film
Open the pouch or roll and insert your document/item. Ensure proper positioning inside the pouch, leaving a small border along the edges for effective sealing.
Feed the Pouch into the Machine
Insert the sealed end of the pouch into the laminator’s entry slot or feeder. Confirm the leading edge is correctly guided and aligned with the machine’s rollers.
Guide the Pouch Through the Machine
Feed the pouch slowly and steadily with gentle, even pressure. Use the machine’s guides or alignment markers to keep the pouch straight and properly aligned.
Collect the Output
Allow the pouch to fully exit the laminator before removing it—exercise caution as it may still be hot. Place the laminated item on a flat surface to cool and set.
Repeat if Needed
For additional items to laminate, repeat the process starting from Step 4. Ensure the Lefu 1700-D2 Laminator remains at the appropriate temperature.
Clean and Store the Machine
After use, switch off the laminator and let it cool down. Clean any adhesive residue or debris with a soft cloth or cleaning tool as per the manufacturer’s instructions. Store the machine in a safe, dry location.
Note that these are general guidelines—always refer to the Lefu 1700-D2 Laminator’s specific manufacturer instructions for accurate usage and safety details.
